A
-
Abtahi, M.
A Theoretical and Experimental Study on the Footprint Analysis of a 185/65R14 Radial Tyre with Tread Pattern
Using Finite Element Method [Volume 20, Issue 6, 2008, Pages 589-598]
-
Afshar taromi, F.
Uncrosslinked Polyethylene Foam Production with Chemical Blowing Agents [Volume 20, Issue 2, 2007, Pages 119-124]
-
Aghili, Y.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Ahmadi, M.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Ahmadi, Z.
Comparison of Chemical Changes During Photooxidation of Polypropylene Film and Filament Containing Phthalocyanine Pigment [Volume 20, Issue 6, 2008, Pages 561-574]
-
Ahmadpour, A.
Dewatering of Yoghurt Using Permeable Membrane and Acrylic Superabsorbent Hydrogel [Volume 20, Issue 6, 2008, Pages 551-559]
-
Arabi, H.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
-
Asl, V.Haddadi
Study of Effective Paramertes on Polymerization Kinetics of HDPE [Volume 20, Issue 1, 2007]
B
-
Bakhtiary, S.
An Experimental Investigation on Fire Behavior of Expanded Polystyrene [Volume 20, Issue 3, 2007, Pages 235-245]
-
Beheshty, M.H.
Studying Room Temperature Curing of Phenolic Resin and their Composites [Volume 20, Issue 4, 2007, Pages 331-336]
-
Beig Zadeh, A.
Synthesis and Characterization of Diaminodisulfide Derivatives and
their use as Accelerator in Curing Process of Rubber Compounds [Volume 20, Issue 2, 2007, Pages 179-186]
-
Borhani, S.
Study of Low Pressure Cold Plasma on Moisture Properties of Polyester Fabric [Volume 20, Issue 2, 2007, Pages 155-163]
C
-
Chaharmahali, M.
Effect of Blending Method on the Mechanical Properties of Wood-Plastic Composites [Volume 20, Issue 4, 2007, Pages 361-367]
D
-
Dashti, A.
Effects of Important Operating Parameters on Product Properties and Operation of HDPE Slurry Reactor [Volume 20, Issue 3, 2007, Pages 209-220]
-
Davari, G.
Study on Mucoadhesion Properties of Chitosan [Volume 20, Issue 6, 2008, Pages 515-519]
-
Doustkhah, K.
Studying Room Temperature Curing of Phenolic Resin and their Composites [Volume 20, Issue 4, 2007, Pages 331-336]
-
Dustgani, A.
Determination of the Optimum Conditions for Production of Chitosan Nanoparticles [Volume 20, Issue 5, 2008, Pages 457-464]
E
-
Ebrahimi, N.Golshan
Investigation of Compatibility and Properties of Polyvinyl Chloride/Ester- based Polyurethane Blends [Volume 20, Issue 1, 2007]
-
Ebrahimi, N.Golshan
Polymer Fibers Production from Blend of Recycled PET Bottles and PP [Volume 20, Issue 1, 2007]
-
Emami, M.
Synthesis of High Isotactic and High Melt Flow Polypropylene in Liquid
Propylene [Volume 20, Issue 3, 2007, Pages 221-226]
-
Esfahanian, M.
A Generic Model for Prediction of Separation Performance of Olefin/Paraffin Mixture by Glassy Polymer Membranes [Volume 20, Issue 6, 2008, Pages 575-588]
-
Esfandeh, M.
Investigation of the Effect of Internal Mold Release Agent and Filler on the Pulling Force in Pultrusion Process [Volume 20, Issue 3, 2007, Pages 271-279]
-
Eslami manesh, V.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
F
-
Faghihi, F.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Fotoohi, F.
Synthesis and Characterization of Diaminodisulfide Derivatives and
their use as Accelerator in Curing Process of Rubber Compounds [Volume 20, Issue 2, 2007, Pages 179-186]
G
-
Ganjaiee Sari, M.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Ganji, M.T.
Mechanical Properties of the Blends of Recycled Polypropylene with Blown and Soft Bitumens [Volume 20, Issue 6, 2008, Pages 539-550]
-
Ganji, T.
Mechanical Properties of Non-Woven Polyester Fibers and Polymer-Modified Bitumen Composites [Volume 20, Issue 5, 2008, Pages 489-502]
-
Gharabaghy, B.
The Effects of γ-Ray Irradiation Dose on the Electrical Resistance and PTC Temperature of Polyethylene/Carbon Composite [Volume 20, Issue 4, 2007, Pages 325-329]
-
Ghasemi, A.R.
Effects of Free Edge Interlaminar Shear Stress on the Residual Stresses of Polymer Composites
Using Hole Drilling Method [Volume 20, Issue 4, 2007, Pages 337-347]
-
Ghiaci, M.
The Study on Electrospinning of Nanofibers from Sodium Alginate and the Effects of Different Co-solvents
on Electrospinning of Polymer Solution [Volume 20, Issue 5, 2008, Pages 437-447]
-
Gholshan Ebrahimi, N.
Study on Shape Memory of Poly(vinyl chloride)/Thermoplastic Polyester Urethane Blends [Volume 20, Issue 2, 2007, Pages 125-132]
-
Gholshan Ebrahimi, N.
Comparison of Compatibilizer Effect on Blend Fibers Including Virgin and Recycled PET [Volume 20, Issue 2, 2007, Pages 133-145]
-
Ghoreishy, M.H.R.
A Theoretical and Experimental Study on the Footprint Analysis of a 185/65R14 Radial Tyre with Tread Pattern
Using Finite Element Method [Volume 20, Issue 6, 2008, Pages 589-598]
-
Ghoreyshi, A.A.
A Generic Model for Prediction of Separation Performance of Olefin/Paraffin Mixture by Glassy Polymer Membranes [Volume 20, Issue 6, 2008, Pages 575-588]
-
Ghoryshi, S.A.A
Sorption Behavior of CO2 and CH4 of Glassy Polymeric Membranes and Analytical Discussion of Partial Immobilization Model [Volume 20, Issue 2, 2007, Pages 165-178]
H
-
Hadadi, V.
Mechanical Properties of the Blends of Recycled Polypropylene with Blown and Soft Bitumens [Volume 20, Issue 6, 2008, Pages 539-550]
-
Hadadi, V.
Mechanical Properties of Non-Woven Polyester Fibers and Polymer-Modified Bitumen Composites [Volume 20, Issue 5, 2008, Pages 489-502]
-
Haddadi Asl, V.
Study of Slurry Ethylene Polymerization with Ziegler-Natta Catalysts: Kinetics and Investigation on the Rate
of Monomer Consumption Equation [Volume 20, Issue 6, 2008, Pages 521-527]
-
Haghgo, M.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Haghighat Kish, M.
Comparison of Chemical Changes During Photooxidation of Polypropylene Film and Filament Containing Phthalocyanine Pigment [Volume 20, Issue 6, 2008, Pages 561-574]
-
Haghighat Kish, M.
Effects of Decalin on Some Properties of Polypropylene Continuous Filaments [Volume 20, Issue 5, 2008, Pages 465-479]
-
Hashemi Najafabadi, S.
Surface Coating of Islets of Langerhans by Activated Polyethylene Glycol [Volume 20, Issue 6, 2008, Pages 529-538]
-
Hormozi, F.
Synthesis of High Isotactic and High Melt Flow Polypropylene in Liquid
Propylene [Volume 20, Issue 3, 2007, Pages 221-226]
-
Hosseini, S.Z.
Study of the Effect of Murray Red Gum Tree Age on Chemical Components and Cellulose Degree of Polymerization [Volume 20, Issue 5, 2008, Pages 481-488]
-
Hosseini shiraz, S.S.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
-
Hosseni, A.K.
The Study on Electrospinning of Nanofibers from Sodium Alginate and the Effects of Different Co-solvents
on Electrospinning of Polymer Solution [Volume 20, Issue 5, 2008, Pages 437-447]
I
-
Imani, M.
Determination of the Optimum Conditions for Production of Chitosan Nanoparticles [Volume 20, Issue 5, 2008, Pages 457-464]
-
Iranmanesh, M.
Studying the Performance of Coal Tar Epoxy on ST37 Steel in Submerge Zone of Persian Gulf [Volume 20, Issue 4, 2007, Pages 349-359]
-
Iwanaga, Y.
Surface Coating of Islets of Langerhans by Activated Polyethylene Glycol [Volume 20, Issue 6, 2008, Pages 529-538]
J
-
Jabbari, E.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
-
Jafari Onsor roodi, H.
Drug Release Modeling from a Novel Temperature-responsive Polymeric System [Volume 20, Issue 3, 2007, Pages 257-269]
-
Jalali Arani, A.
The Effect of Leather Fiber upon Vulcanization Characteristics and Physical-Mechanical Properties of Elastomeric Compounds [Volume 20, Issue 4, 2007, Pages 391-397]
-
Jamal Omidi, M.
Considering the Effects of Cross - Section and Fiber Orientation of Composite Tubes Under Axial Loading in Energy Absorption [Volume 20, Issue 3, 2007, Pages 289-296]
K
-
Kabiri, E.
Study of the Effect of Murray Red Gum Tree Age on Chemical Components and Cellulose Degree of Polymerization [Volume 20, Issue 5, 2008, Pages 481-488]
-
Kaffashi, B.
Preparation of Polyurethane/Clay Nanocomposites: Investigating the Dispersion of Organoclays in PTMEG [Volume 20, Issue 3, 2007, Pages 247-255]
-
Kak Savandi, A.
Investigation of the Effect of Internal Mold Release Agent and Filler on the Pulling Force in Pultrusion Process [Volume 20, Issue 3, 2007, Pages 271-279]
-
Kalaee, M.R.
Prediction of Optimum Time for Oxygen Clearance in Solution
Polymerization of Vinyl Acetate in Isopropyl Alcohol [Volume 20, Issue 2, 2007, Pages 101-108]
-
Katbab, A.A.
Comparison of Chemical Changes During Photooxidation of Polypropylene Film and Filament Containing Phthalocyanine Pigment [Volume 20, Issue 6, 2008, Pages 561-574]
-
Kazemi Najafi, S.
Effect of Blending Method on the Mechanical Properties of Wood-Plastic Composites [Volume 20, Issue 4, 2007, Pages 361-367]
-
Khalkhali Zavih, T.
Die Design for Polyethylene Foam Extrusion with Azodicarbonamide as Foaming Agent [Volume 20, Issue 1, 2007]
-
Khosravi, M.
Mechanical Properties of the Blends of Recycled Polypropylene with Blown and Soft Bitumens [Volume 20, Issue 6, 2008, Pages 539-550]
-
Khosravi, M.
Mechanical Properties of Non-Woven Polyester Fibers and Polymer-Modified Bitumen Composites [Volume 20, Issue 5, 2008, Pages 489-502]
-
Kookabi, M.
Drug Release Modeling from a Novel Temperature-responsive Polymeric System [Volume 20, Issue 3, 2007, Pages 257-269]
-
Kotak, R.
Comparison of Chemical Changes During Photooxidation of Polypropylene Film and Filament Containing Phthalocyanine Pigment [Volume 20, Issue 6, 2008, Pages 561-574]
M
-
Mahdavian, M.
Sorption Behavior of CO2 and CH4 of Glassy Polymeric Membranes and Analytical Discussion of Partial Immobilization Model [Volume 20, Issue 2, 2007, Pages 165-178]
-
Mahfouzi, K.
Solvent Texturing of Polyester Yarns Using Trichloroacetic Acid/Methylene Chloride [Volume 20, Issue 5, 2008, Pages 429-436]
-
Mahzoon, R.
Investigation of Contact Poling Process in Thin Films of Polymer Doped with Disperse Red 1 Dye [Volume 20, Issue 5, 2008, Pages 449-455]
-
Majidian, N.
Synthesis and Characterization of Diaminodisulfide Derivatives and
their use as Accelerator in Curing Process of Rubber Compounds [Volume 20, Issue 2, 2007, Pages 179-186]
-
Masaeli, E.
Study of Low Pressure Cold Plasma on Moisture Properties of Polyester Fabric [Volume 20, Issue 2, 2007, Pages 155-163]
-
Maskooki, A.
Dewatering of Yoghurt Using Permeable Membrane and Acrylic Superabsorbent Hydrogel [Volume 20, Issue 6, 2008, Pages 551-559]
-
Masoudi, A.
Study of Ethylene/Vinyl Acetate Transformation to Ethylene/Vinyl Alcohol Copolymer by NMR and DSC [Volume 20, Issue 4, 2007, Pages 399-406]
-
Mehrdad shokrieh, M.
Effects of Structural Parameters on Mechanical Properties
Polymer/Clay Nanocomposites [Volume 20, Issue 2, 2007, Pages 187-195]
-
Mehrdad shokrieh, M.
Considering the Effects of Cross - Section and Fiber Orientation of Composite Tubes Under Axial Loading in Energy Absorption [Volume 20, Issue 3, 2007, Pages 289-296]
-
Mehtarani, R.
Synthesis of High Isotactic and High Melt Flow Polypropylene in Liquid
Propylene [Volume 20, Issue 3, 2007, Pages 221-226]
-
Mehtarani, R.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
-
Mirzadeh, H.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
-
Moeini, T.
Effects of Decalin on Some Properties of Polypropylene Continuous Filaments [Volume 20, Issue 5, 2008, Pages 465-479]
-
Moghaddam, M.R.Abdollahi
Styrene Monomer Recovering from Thermal Degradation of Polystyrene [Volume 20, Issue 1, 2007]
-
Moghaddam, M.Sedighi
Study of Effective Paramertes on Polymerization Kinetics of HDPE [Volume 20, Issue 1, 2007]
-
Mohajerani, A.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Mohajerani, E.
Investigation of Contact Poling Process in Thin Films of Polymer Doped with Disperse Red 1 Dye [Volume 20, Issue 5, 2008, Pages 449-455]
-
Mohammadi, N.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Mohammadi, Y.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
-
Mohseni, M.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Mokhtari, J.
Effects of Important Operating Parameters on Product Properties and Operation of HDPE Slurry Reactor [Volume 20, Issue 3, 2007, Pages 209-220]
-
Montazer, M.
Comparison of Different Methods of Denim Stone Washing by Pumice Stone, Acid Cellulases and Neutral Cellulases [Volume 20, Issue 4, 2007, Pages 369-380]
-
Moradian, S.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Morshed, M.
The Study on Electrospinning of Nanofibers from Sodium Alginate and the Effects of Different Co-solvents
on Electrospinning of Polymer Solution [Volume 20, Issue 5, 2008, Pages 437-447]
-
Morshed, M.
Study of the Effect of Heat Treatment on Nylon 66 Tire Cords Structure and its Physical Properties [Volume 20, Issue 2, 2007, Pages 109-117]
-
Moztarzadeh, F.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
N
-
Najafi, M.
Study of Slurry Ethylene Polymerization with Ziegler-Natta Catalysts: Kinetics and Investigation on the Rate
of Monomer Consumption Equation [Volume 20, Issue 6, 2008, Pages 521-527]
-
Nouri, M.
Solvent Texturing of Polyester Yarns Using Trichloroacetic Acid/Methylene Chloride [Volume 20, Issue 5, 2008, Pages 429-436]
O
-
Omidkhah, M.R.
Study of Catalyst, Aging Time and Surfactant Effects on Silica Inorganic Polymer Characteristics [Volume 20, Issue 2, 2007, Pages 147-153]
P
-
Pakizeh, M.
Study of Catalyst, Aging Time and Surfactant Effects on Silica Inorganic Polymer Characteristics [Volume 20, Issue 2, 2007, Pages 147-153]
-
Pazooki, M.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Pircheraghi, G.
Study on the Effects of Temperature, Time and the Policy of Prepolymerization on Particle Morphology in Propylene Slurry Polymerization with Heterogeneous
Ziegler-Natta Catalysts [Volume 20, Issue 5, 2008, Pages 417-428]
-
Poorsang, F.
Preparation of Polyurethane/Clay Nanocomposites: Investigating the Dispersion of Organoclays in PTMEG [Volume 20, Issue 3, 2007, Pages 247-255]
-
Pourmahdian, S.
Study on the Effects of Temperature, Time and the Policy of Prepolymerization on Particle Morphology in Propylene Slurry Polymerization with Heterogeneous
Ziegler-Natta Catalysts [Volume 20, Issue 5, 2008, Pages 417-428]
R
-
Ramezani, S.
Study of the Effect of Heat Treatment on Nylon 66 Tire Cords Structure and its Physical Properties [Volume 20, Issue 2, 2007, Pages 109-117]
-
Ramezani Dakhel, H.
The Effect of Leather Fiber upon Vulcanization Characteristics and Physical-Mechanical Properties of Elastomeric Compounds [Volume 20, Issue 4, 2007, Pages 391-397]
-
Ramzani Saadat Abadi, A.
Effects of Important Operating Parameters on Product Properties and Operation of HDPE Slurry Reactor [Volume 20, Issue 3, 2007, Pages 209-220]
-
Rashidi, B.
Study on Shape Memory of Poly(vinyl chloride)/Thermoplastic Polyester Urethane Blends [Volume 20, Issue 2, 2007, Pages 125-132]
-
Rezadoost, A.M.
Investigation of the Effect of Internal Mold Release Agent and Filler on the Pulling Force in Pultrusion Process [Volume 20, Issue 3, 2007, Pages 271-279]
-
Rezaei, M.
Dewatering of Yoghurt Using Permeable Membrane and Acrylic Superabsorbent Hydrogel [Volume 20, Issue 6, 2008, Pages 551-559]
-
Rezvani, M.H.
Investigation of Contact Poling Process in Thin Films of Polymer Doped with Disperse Red 1 Dye [Volume 20, Issue 5, 2008, Pages 449-455]
S
-
Sadati, M.
Synthesis of High Isotactic and High Melt Flow Polypropylene in Liquid
Propylene [Volume 20, Issue 3, 2007, Pages 221-226]
-
Sadeghian Maryan, A.
Comparison of Different Methods of Denim Stone Washing by Pumice Stone, Acid Cellulases and Neutral Cellulases [Volume 20, Issue 4, 2007, Pages 369-380]
-
Safi, S.
The Study on Electrospinning of Nanofibers from Sodium Alginate and the Effects of Different Co-solvents
on Electrospinning of Polymer Solution [Volume 20, Issue 5, 2008, Pages 437-447]
-
Salami-Kalajahi, M.
Study of Slurry Ethylene Polymerization with Ziegler-Natta Catalysts: Kinetics and Investigation on the Rate
of Monomer Consumption Equation [Volume 20, Issue 6, 2008, Pages 521-527]
-
Salehi Mobarakeh, H.
Study of Ethylene/Vinyl Acetate Transformation to Ethylene/Vinyl Alcohol Copolymer by NMR and DSC [Volume 20, Issue 4, 2007, Pages 399-406]
-
Salehpour, B.
The Effects of γ-Ray Irradiation Dose on the Electrical Resistance and PTC Temperature of Polyethylene/Carbon Composite [Volume 20, Issue 4, 2007, Pages 325-329]
-
Sarmadi, M.
Studying the Performance of Coal Tar Epoxy on ST37 Steel in Submerge Zone of Persian Gulf [Volume 20, Issue 4, 2007, Pages 349-359]
-
Sattarie Wafaie, A.H.
Study of Ethylene/Vinyl Acetate Transformation to Ethylene/Vinyl Alcohol Copolymer by NMR and DSC [Volume 20, Issue 4, 2007, Pages 399-406]
-
Semsarzadeh, M.A.
Prediction of Optimum Time for Oxygen Clearance in Solution
Polymerization of Vinyl Acetate in Isopropyl Alcohol [Volume 20, Issue 2, 2007, Pages 101-108]
-
Shabani, E.
The Effect of Leather Fiber upon Vulcanization Characteristics and Physical-Mechanical Properties of Elastomeric Compounds [Volume 20, Issue 4, 2007, Pages 391-397]
-
Shakeri, A.
Study of the Effect of Murray Red Gum Tree Age on Chemical Components and Cellulose Degree of Polymerization [Volume 20, Issue 5, 2008, Pages 481-488]
-
Shojasadati, S.A.
Surface Coating of Islets of Langerhans by Activated Polyethylene Glycol [Volume 20, Issue 6, 2008, Pages 529-538]
-
Shokrieh, M.M.
Effects of Free Edge Interlaminar Shear Stress on the Residual Stresses of Polymer Composites
Using Hole Drilling Method [Volume 20, Issue 4, 2007, Pages 337-347]
-
Siroos Azar, M.
Drug Release Modeling from a Novel Temperature-responsive Polymeric System [Volume 20, Issue 3, 2007, Pages 257-269]
-
Sobhan Manesh, K.
Synthesis and Characterization of Diaminodisulfide Derivatives and
their use as Accelerator in Curing Process of Rubber Compounds [Volume 20, Issue 2, 2007, Pages 179-186]
-
Soleimani, M.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
-
Soltanieh, M.
Effects of Important Operating Parameters on Product Properties and Operation of HDPE Slurry Reactor [Volume 20, Issue 3, 2007, Pages 209-220]
-
Sonbolestan, S.E.
Effects of Structural Parameters on Mechanical Properties
Polymer/Clay Nanocomposites [Volume 20, Issue 2, 2007, Pages 187-195]
-
Sonbolestan, S.E.
Preparation of Polyurethane/Clay Nanocomposites: Investigating the Dispersion of Organoclays in PTMEG [Volume 20, Issue 3, 2007, Pages 247-255]
T
-
Taghi Akbari, L.
An Experimental Investigation on Fire Behavior of Expanded Polystyrene [Volume 20, Issue 3, 2007, Pages 235-245]
-
Taghizadeh, S.M.
Study on Mucoadhesion Properties of Chitosan [Volume 20, Issue 6, 2008, Pages 515-519]
-
Tajvidi, M.
Effect of Blending Method on the Mechanical Properties of Wood-Plastic Composites [Volume 20, Issue 4, 2007, Pages 361-367]
-
Teymori, M.B.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
-
Toozandeh Jani, H.
Considering the Effects of Cross - Section and Fiber Orientation of Composite Tubes Under Axial Loading in Energy Absorption [Volume 20, Issue 3, 2007, Pages 289-296]
V
-
Vasheghani-Farahani, E.
Surface Coating of Islets of Langerhans by Activated Polyethylene Glycol [Volume 20, Issue 6, 2008, Pages 529-538]
-
Vasheghani-Farahani, E.
Determination of the Optimum Conditions for Production of Chitosan Nanoparticles [Volume 20, Issue 5, 2008, Pages 457-464]
-
Vatankhah, M.
Study on the Effects of Temperature, Time and the Policy of Prepolymerization on Particle Morphology in Propylene Slurry Polymerization with Heterogeneous
Ziegler-Natta Catalysts [Volume 20, Issue 5, 2008, Pages 417-428]
Y
-
Yousefi, A. A.
Mechanical Properties of Non-Woven Polyester Fibers and Polymer-Modified Bitumen Composites [Volume 20, Issue 5, 2008, Pages 489-502]
-
Yousefi, A.A.
Mechanical Properties of the Blends of Recycled Polypropylene with Blown and Soft Bitumens [Volume 20, Issue 6, 2008, Pages 539-550]
Your query does not match with any item